Auto Ch Memory; Skipping Stored Channel; Clear All; Display The Channel Information - Sharp LC 19SB27UT Operation Manual

Watching TV

Auto Ch Memory

Auto Ch Memory makes the TV look for all channels
viewable in the set area.
1
Press MENU and the MENU screen displays.
2
Press ▲/▼ to select "Channel", then press ▶ or ENTER.
Press ▲/▼ to select "Auto Ch Memory", then press ▶ or
ENTER.
3
Press ▲/▼ to select "Signal Type", then press ◀/▶ to
select "Cable" or "Air".
4
Press ▲/▼ to select "Automatic Search", then press
ENTER.
5
The TV will begin memorizing all the channels available
in your area.
• It may take from 15 minutes to 30 minutes to complete
memorizing digital cable channels.
Depending on the reception condition, a BAR display
may not advance for several minutes, please be
patient.
NOTE
• Memorizing channels is best accomplished during evening
"PRIMETIME" hours, as more stations are broadcasting
digital signals. Memorizing channels can only be
accomplished while a station is broadcasting a digital
signal to set that channel into memory.
• New digital channels may be added to your area
periodically, it is recommended to perform the "Automatic
Search" procedure regularly.

Skipping stored channel

You can set channel selection disabled using CH
1
Press MENU and the MENU screen displays.
2
Press ▲/▼ to select "Channel", then press ▶ or ENTER.
3
Press ▲/▼ to select "Add/Delete", then press ▶ or
ENTER.
4
Press ▲/▼ to select "Add/Delete", then press ▶ or
ENTER.
5
Press ▲/▼ to select the channel that you want to skip.
6
Press ◀/▶ to select "Delete" for selected channel.
7
Press EXIT to return to the normal screen.
NOTE
• To add a digital channel you are watching:
Select a channel you want to add. Then select "Adding
Channel" in step 4, press ▶ or ENTER.
• To release the skipping channel:
Select "Add" in step 6.

Clear All

All channels are deleted from the channel memory.
1
Press MENU and the MENU screen displays.
2
Press ▲/▼ to select "Channel", then press ▶ or ENTER.
3
Press ▲/▼ to select "Add/Delete", then press ▶ or
ENTER.
4
Press ▲/▼ to select "Clear All", then press ▶ or ENTER.
5
Press EXIT to return to the normal screen.

Display the channel information

Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, the digital information
will appear for a few seconds.
• Channel number
• Channel label (if preset) • Broadcast program name
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
When the TV receives a analog signal, the analog
information will appear.
• Channel number
• V-Chip rating
• Sleep timer
• Picture size

Setting MTS/SAP stereo mode

The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS).
The TV with MTS can receive mono sound, stereo
sound and Secondary Audio Programs (SAP). The
SAP feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or SAP
/ .
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
NOTE
• MTS only operates while in TV mode.
• MTS is available only when receiving analog broadcasting,
not when receiving digital broadcasting.
• When the TV receives a stereo or SAP broadcast, the
word "Stereo" or "SAP" displays on-screen if you press
DISPLAY.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
1
In analog TV mode, press AUDIO and the "Audio"
menu screen displays. "MTS" will be highlighted.
2
Press AUDIO again or ◀/▶ to select "Stereo",
"SAP" or "Mono".
3
Press EXIT to return to the normal screen.
• Station name
• Signal type
• Audio language
• Picture size
• Channel label (if preset)
• Signal type
• Audio information (Stereo, SAP or Mono)
• Resolution
15