Table of Contents
Advertisement
Front Panel - FBR-1403TX
Power
On - Power on.
Off - No power.
Status (Red)
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
For each port, there are 2 LEDs
LAN
WAN
On - Connection to the modem attached to the WAN (Internet) port is
established.
Flashing - Data is being transmitted or received via the WAN port.
Print Act
On - Connection to printer established.
Off - No connection to printer; printer is Off or Off-line.
Flashing - Data is being transmitted to the printer.
Print Error
On - Printer error detected.
Off - No printer error detected.
Figure 3: Front Panel - FBR-1403TX
Link/Act
On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub) port.
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
100
On - Corresponding LAN (hub) port is using 100BaseT.
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
Introduction
5
Advertisement
Table of Contents
Need help?
Do you have a question about the FBR-1403TX and is the answer not in the manual?