Panasonic Lumix DMC-SZ10 Operating Instructions Manual page 112

Sending selected images ([Send Images Stored in the Camera])
1
Press [Wi-Fi].
2
Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].
3
Press 3/4 to select [Send Images Stored in the Camera],
and then press [MENU/SET].
4
Press 3/4 to select [Smartphone], and then press [MENU/
SET].
5
Press [MENU/SET].
6
Press [MENU/SET].
•
For details on the connection methods, refer to P104, 105.
7
Press 3/4 to select a device you want to connect, and then press [MENU/SET].
8
Check the send setting, and then press [MENU/SET].
•
To change the send setting, press 2.
9
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•
To change the setting or disconnect, press [Wi-Fi].
[SINGLE] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
[MULTI] setting
1 Press 3/4/2/1 to select the picture, and then press
[MENU/SET]. (repeat this step)
•
If you press [MENU/SET] again, the setting is cancelled.
2 Press 2 to select [OK], and then press [MENU/SET].
•
The number of pictures that can be sent by [MULTI] is
limited.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
(P127)
(P100)
- 112 -
Select a function
Remote Shooting & View
Send Images While Recording
Send Images Stored in the Camera
Cancel Select
1 2
4 5
7 8
Set
3
6
9