Panasonic Lumix DMC-SZ10 Operating Instructions Manual page 153

TV, PC and printer
The picture does not appear on the television.
•
Is the camera connected to the TV correctly?
> Set the TV input to External Input Mode.
The display areas on the TV screen and the camera's monitor are different.
•
Depending on the TV model, the pictures may be elongated horizontally or vertically or they may be
displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of the
TV?
> Connect the camera to the TV with the AV cable (optional) and then play back the pictures on the
camera. (P130)
The picture is not displayed fully on the TV.
•
Check [TV Aspect] setting.
Cannot communicate with the PC.
•
Is the camera connected to the PC correctly?
•
Is the camera recognised by the PC correctly?
> Select [PC] when connecting.
> Turn this unit off and on.
The card is not recognised by the PC.
(The built-in memory is recognised.)
•
Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
•
If there are two or more USB terminal on a single PC, try connecting the USB connection cable to
another USB terminal.
The card is not recognised by the PC.
(SDXC memory card is used)
•
Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
A message prompting to format the card may be displayed when connecting, but do not format.
•
If the [Access] displayed on the monitor does not disappear, disconnect the USB connection cable
after turning this unit off.
The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer that does not support PictBridge.
> Select [PictBridge(PTP)] when connecting.
Others
(P45)
(P133)
(P135)
- 153 -