Transferring images to a PC
Connect the computer and camera with the USB connection cable
Please turn this unit on and your PC before connecting.
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Insert the USB connection cable so that its [
Press 4 to select [PC], and then press [MENU/SET].
Drag and drop files and folders in the camera to the PC.
When the image transfer is complete, disconnect the USB connection cable safely.
If the remaining battery power becomes low while the camera and the PC are communicating, the
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
Before inserting or removing a card, turn the camera off and disconnect the USB connection cable.
Otherwise, data may be destroyed.
Connecting to other equipment
A drive ([LUMIX]) is displayed in [Computer]
A drive ([LUMIX]) is displayed on the desktop
- 133 -
] mark will face the [ ] mark side of the