Braille Presentation - Papenmeier Braillex EL 80s User Manual

Working Modes
You can also decide not to have the Braille display follow the cursor movements.
For this purpose, press the right key towards the front while the cursor is visible
on the display. You will hear the message "the active cursor will not move the
Braille display", and the automatic tracking is disabled. In order to enable the
cursor tracking again, move the display away from the cursor and press right
key towards the front again.
Cursor Tracking
Key
Right key in front position while
cursor is NOT within Braille window
Right key in front position while
cursor is visible within Braille
window

Braille presentation

When pressing the left key in front position, you access a number of Braille
presentation options. A dialog box with six different parameters will pop up:
In this dialog, you can adjust the most frequently used Braille presentation
options. The choices you have refer to the Braille verbosity settings within Jaws.
The settings displayed are the ones that are currently selected.
Move the Easy Access Bar one step down or up to move between the different
parameters. Move the Easy Access Bar one step left or right to change the
values. The options are the following:
Braille presentation options
Parameters
Braille mode
Grade two translation
Translate word under cursor
Mark with dots 7 and 8
Text display in Braille
Display in
10
Function
Enable cursor tracking and move
display to the cursor position
Disable cursor tracking
Line
Structured
On
Off
Translating whole line
Expanding current word
On
Off
As on screen
Line up text
Eight dot Braille
Six dot Braille
Options