Operation Of "Rfp Alert; Arming Alert; Disarming Alert - Pioneer KEH-P8900R Operation Manual

RFP Alert Function
3. Press the BAND button and
cancel the RFP Alert Setting
Menu.
Setting of the "RFP Alert" is now
complete.
Note:
• In case that the battery is disconnected or the RESET button is pressed, it may be necessary to
reprogram the RFP Alert Menu, otherwise this setting needs to be done only once.
• When the RFP Alert is armed, you cannot disarm it by pressing the RESET button.

Operation of "RFP Alert"

Providing the installation and setting of the "RFP Alert Setting Menu" has been performed
correctly, operation of the "RFP Alert" is very simple.

Arming Alert

To arm your Alert simply turn off the ignition and detach the front panel, as described on
page 51. After detaching the front panel the "RFP Alert" will automatically arm itself after
30 seconds, providing all of the doors are closed. If after 30 seconds, a door still remains
open the RFP Alert will not arm until the last door has been closed. After closing all of the
doors, ensure that they are securely locked. The LED indicator on the head unit will flash
as a visual deterrent. Your vehicle is now protected by your "RFP Alert".

Disarming Alert

Upon entering your vehicle, and within the "Entry Delay Time" set within the "RFP Alert
Menu", attach your Pioneer Front Panel as described on page 52.
If you have forgotten your removable front panel, simply insert the ignition key in the igni-
tion and turn the key from "OFF" to "ON" within the "Entry Delay Time".
61