Table of Contents
Advertisement
First-time Operation
3
Turn your computer on
(1) Using the provided stylus, push the center of the reset switch
straight in for 1 second. If the DC-IN Jack's cover makes it diffi-
cult to push the reset switch, push the cover in a little as you
push the switch.
CAUTION
Use only the stylus provided to push the reset switch.
Do not push the reset switch with any other sharp-pointed
objects, i.e. pencils, and ball point pens. The reset switch or
other parts may become damaged.
If the confirmation message is displayed,
press
(For the CF-P1S3 series)
press
(For the CF-P1S1 series)
(2) Tap the screen to set up your Pocket PC.
The Windows* alignment screen is displayed.
* This computer uses Microsoft
(3) Align the touchscreen.
(For alignment, tapping operations are required. For information
on tapping, refer to page 19.)
"+" is displayed in the center, upper left, lower left, lower right,
and upper right portions of the screen, in that order. Each time
the "+" mark is displayed, tap the center of the "+" mark with the
stylus.
(4) At [stylus], read the on-screen instructions and tap [Next].
(5) At [pop-up menus], follow the on-screen instructions.
(6) After [Congratulations!] is displayed, tap [Next].
(7) At [location], select the time zone and tap [Next].
(8) At [complete], tap the screen to begin using CF-P1.
4
Set the time and date
(1) Tap
- [Settings] - [System] tab - [Clock].
(2) Set the time and date.
(3) Tap [ok].
NOTE
You can also set the time and date by tapping
This concludes the first-time use operation guidelines.
14
®
®
Windows
Powered Pocket PC 2002.
on [Today] screen.
Reset Switch
Advertisement
Table of Contents
