Safety Precautions - Durabrand CD-916 Operating Instructions Manual

SAFETY PRECAUTIONS

Do not take the set apart. The laser beam used in the set may harm your eyes. Refer
servicing to qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off
when the disc door is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty
locations, or locations with long heavy vibrations, or tilted surfaces.
The set's cabinet may warp or the set may be damaged if it is placed in direct
sunlight, near heaters (where the temperature is 140
the windows closed. In the summer, the temperature may get as high as 212
or more.
Use the set within a temperature range of 41
Use ONLY the DC 4.5V 600mA AC ADAPTOR with polarity
damage your set. Disconnect the ADAPTOR from the wall outlet when the set is not
to be used for an extended period of time (3 days or more).
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially
available cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic
hazard and is illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with your set provide superb stereo listening while allowing
you to hear some outside sounds when listening at normally low volume levels.
Listening at extremely high volume levels minimizes the intrusion of outside noise/
sounds. In the interest of safety, it is strongly advised against the use while engaging
in activities where the exclusion of external sounds (whistles, horns, sirens, traffic,
etc.). Also loud volume can hurt your ears. If you notice that the sound has become
weak or distorted or if tracks do not change, this is an indication that your batteries
are weak. Replace both batteries at the same time (see Using With Batteries).
Your CD-916 is identified by a serial number located in the BATTERY COMPARTMENT.
Record this number in the space provided below.
Model CD-916 Serial No.
This manual contains detailed information on its safety and use. Please read it
carefully so that you may take full advantage of its many features, and ensure a safe
reliable operation. Keep this manual for future reference.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass.
This is called condensation. Condensation may occur on internal operating parts of
the lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or from a cold
room to a heated one, or in the summer, if the set is moved from an air-conditioned
room or car to a hot or humid location.
Should condensation occur, the set may not operate properly. Open the CD DOOR
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd
F/60
0
F/5 C to 95
0 0
Date Purchased:
11
12
C or higher) or in cars with
0
F/100
0
F/35 C.
0 0
, others may
IB-CD916(CDR79AD-60J8)-WM-E-010805
2/23/2005, 11:49 AM
C
0