Durabrand CD-916 Quick Instructions

QUICK INSTRUCTIONS

POWERING UP

Power your CD player by connecting an optional AC ADAPTOR or by inserting 2
size "AA" fresh alkaline batteries.
NO TE: The only AC ADAPTOR suitable for this player is DC 4.5V 600mA, with
polarity
and current (mA) before buying an AC ADAPTOR.

BATTERY OPERATION

Open the BATTERY DOOR.
1.
2. Insert 2 size "AA" fresh alkaline batteries as shown.
NOTE: Player will not work, and batteries will be
drained, if not inserted as shown on the
bottom of the set.
3. Close the BATTERY DOOR.
If the symbol "
NOTE:
batteries are weak and need replacement.

HEADPHONES PLUGGING IN

Plug the headphones into the PHONES jack on the
right side of the player, and put on the headphones.

VOLUME CONTROL

Adjust the VOLUME control to your preference.

BASS BOOST

Slide the switch on the bottom of the set to ON position to give you more low
frequency tones.

RADIO OPERATION

1 Slide the CD(RADIO OFF)/FM/AM FUNCTION switch (on the left side of the set)
to AM or FM position to select the desired wave band.
2 Tune into the station you prefer using the TUNING control, the station's frequency
will be displayed in the readout. Adjust for the clearest sound or the station's
freqency if know.
3 If you tune into an FM stereo station, "FM ST" will show in the display.
4 Adjust the VOLUME control to your listening preference.
5 If you prefer more bass, slide the BASS BOOST switch to ON position.
6 To turn off the radio, slide the CD(RADIO OFF)/FM/AM FUNCTION switch to CD
(RADIO OFF) position.
QI-CD916(CDR79AD-60J8)-WM-E-010805.pmd
MODEL CD-916
, others may damage your player. Please check voltage
" shows in the display, your
1
1
2 SIZE "AA"
BATTERIES
TO PHONES
JACK
QI-CD916(CDR79AD-60J8)-WM-E-010805
1/20/2005, 4:04 PM