Intek MX-825V Instruction Manual page 15

Advanced Functions
TIMER SCAN : If this option is selected, SCAN will automatically stop when a signal is detected on one
channel, and re-start automatically after a programmed time.
CARRIER SCAN : If this option is selected, SCAN will automatically stop when a signal is detected on
one channel, in order to listen to the communication and SCAN will re-start when no more signal is
detected on that channel.
Note : The TIMER SCAN TIME is programmable with the PC software.
Press MENU Key (4) to confirm the desired option and press the EXIT Key (6) to return to Stand-By
Mode or use Rotary Switch (4) to select other functions.
Channel Scanning Addition / Deletion
Select the channel to be added to the scanning list. Enter the MENU Mode, select the SCN.ADD
function setup and press MENU Key (4) to confirm. Use the Rotary Switch (4) to select the following
options :
ADD : the selected channel will be added to the scanning list; the Channel Scanning Icon (L) will appear on
the LCD display (3).
DEL : the selected channel will be removed from the scanning list; the Channel Scanning Icon (L) will
disappear from the LCD display (3).
Press MENU Key (4) to confirm the desired option and press the EXIT Key (6) to return to Stand-By
Mode or use Rotary Switch (4) to select other functions.
Priority Scan Function
If a Priority Channel has been programmed, during scan function, radio will check periodically this
channel for incoming signals. When a signal is received on this channel, radio will switch automatically to
priority channel and the PRI Icon (F) will appear on LCD Display (3).
Note : This function is totally programmed by PC software and it is available only in CHANNEL MODE.
Priority Channel Cancel Temporarily
When the Scan function stops on Priority Channel, press EXIT key (6) to temporarily remove the priority
channel.
Note : When user exit the Scan function, the removed Priority Channel will be resumed.
Channel Scanning Cancel Temporarily
User can temporalily remove a channel from scanning list. When Scan Function stops on an unwanted
channel, press EXIT Key (6) to temporarily delete this channel from the scanning list.
The Scan function will resume immediately.
Note : When user exit the Scan function, Channel removed from scanning list will be resumed.
Reply Channel
During Scanning process, press PTT key (16) to stop the scan and switch to reply channel.
Note : This function may be enabled by using the PC software.
Scan Trasmitting / Receiving Resume Delay
When Scan stops on one channel, it will re-start only when the delay time is expired, even if incoming
signals disappear.
Note : The Delay Time may be programmed by using the PC software.
- 14 -