Intek MX-825V Instruction Manual page 13

Menu Operation - Advanced Functions
Menu function sequence
MODE (Operating modes) ---> TX.POW (transmitter power High-Middle-Low) --> SQH.LEV (Squelch
Level) --> SQH.MOD (Squelch modes) --> ZONE (Zone selection) --> MONI (Monitor modes) --> TOT
(Time Out Timer) --> SCN.MO (Scan modes) --> SCN.TY (Scan Type) --> REVERSE (Reverse
Frequency) --> BRIGHT (LCD DIsplay Brightness) --> K.TONE (Keypad Tone ON/OFF) --> S.TONE
(Side Tone ON/OFF) --> BEEP (Beep Tone ON/OFF) --> SCN.ADD (channel scanning add or remove) -
-> CTC/DCS (CTCSS/DCS Setup) --> COMPAND (Compander ON/OFF) --> EMPH (Emphasis
ON/OFF) --> CH.DEL (Channel Deletion Setup) -->TEMP (Temperature Adjusting ON/OFF)
ADVANCED FUNCTIONS
Zone Mode / Zone Selection
Zone Mode
Press MENU Key (4) to enter the MENU Mode and select the MODE function. Use the Rotary Switch
(4) to select ZO NO. (Zone Number) or ZO NAME (Zone Name) modes. Press MENU key (4) to confirm
selection and return to Stand-by mode.
Zone Selection
Press MENU Key (4) to enter the MENU Mode. Use the Rotary Switch (4) to select ZONE function and
press MENU Key (4) to confirm the selection. Use the Rotary Switch (4) to select the desired Zone
Number and confirm by pressing the MENU Key (4). Press EXIT Key (6) to return to Stand-by mode.
In CHANNEL MODE or NAME MODE, the numerical indication (I) will indicate the selected zone
number. 32 zones are available.
Channel Deletion
Select the channel to remove and enter the MENU Mode. Enter the CH.DEL function setup and select
CANCEL (cancel the operation) or SURE (confirm and delete the selected channel). When user selects
SURE option, the SURE! indication appears on LCD display and the channel will be deleted then radio
returns to Stand-by mode.
Monitor Function
This function opens Squelch in order to listen to the background noise and weak signals. The Monitor
function has 4 available options. In MENU mode enter the MONI function setup and use Rotary Switch
(4) to select the desired option as follow :
MONI A (Tone Squelch Invalidation-Instantaneous)
If this option is selected, press and hold MONI key (10) to open squelch on channels with CTCSS/DCS,
DTMF, 2/5-Tone and release this key to close squelch.
MONI B (Tone Squelch Invalidation-Trigger)
If this option is selected, press MONI key (10) to open squelch on channels with CTCSS/DCS, DTMF, 2/5-
Tone and press again this key to close squelch.
MONI C (Carrier Squelch Invalidation-Instantaneous)
If this option is selected, press and hold MONI key (10) to open squelch and release this key to close
squelch.
MONI D (Carrier Squelch-Trigger)
If this option is selected, press MONI key (10) to open squelch and rand press again this key to close
squelch.
Press MENU Key (4) to confirm the desired option and press EXIT key to return to Stand-by mode.
- 12 -