BK Precision P12-300 Owner's Manual
  1. Manuals
  2. Brands
  3. BK Precision Manuals
  4. Subwoofer
  5. P12-300
  6. Owner's manual
BK Precision P12-300 Owner's Manual

BK Precision P12-300 Owner's Manual

Bk p12-300 subwoofer system
Hide thumbs Also See for P12-300:
Table of Contents

Advertisement

Quick Links

Download this manual
P12-300
Subwoofer System

OWNERS MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P12-300 and is the answer not in the manual?

Questions and answers

Related Manuals for BK Precision P12-300

Summary of Contents for BK Precision P12-300

  • Page 1: Owners Manual

    P12-300 Subwoofer System OWNERS MANUAL...

  • Page 2: Table Of Contents

    CONTENTS Page No. Safety instructions. Connecting up your P12-300. Auto / On Connecting up using the high level input. Connecting up using the low level input. Setting up your P12-300. Controls and their functions. Specifications.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Caution: To avoid the risk of electric shock do not remove the panel from the cabinet. If this unit fails or has a serious deterioration in performance then refer repair to the dealer where you purchased the unit. 1)Please read these instructions carefully and keep them for future reference.

  • Page 4: Connecting Up Your P12-300

    “Mono”), or to stereo pre-amp output where available. The P12-300 comes fitted with four black M8 nylon screws that act as feet and help prevent the base of the subwoofer from getting scratched. If you wish to take advantage of the...

  • Page 5: Connecting Up Using The High Level Input

    Now plug the neutrik connector into the high level input of the P12-300. The Neutrik plug will fit only one way as it has a key. Next push the plug in then turn clockwise until you feel it latch. To undo the Neutrik plug, pull back the silver lever on the Neutrik plug and turn counter-clockwise.

  • Page 6: Connecting Up Using The Low Level Input

    Figure 2. Shows a diagram on how to connect the low level input. Using the supplied RCA to RCA interconnect, plug one end into the P12-300 low level input and the other end into the dedicated sub output on your amplifier or processor. If a sub out is not available then you can use a spare set of pre-amp outputs.

  • Page 7: Setting Up Your P12-300

    SETTING UP YOUR P12-300 Connect your P12-300 as shown in Figure 1 or Figure 2. Then attach your subwoofer to the power supply using the power cable supplied, at this point have the power switch in the off position. Now turn both the high level and low level gains to the minimum position, and the frequency control to 120Hz.

  • Page 8: Controls And Their Functions

    CONTROLS AND THEIR FUNCTIONS TO AVOID RISK OF ELECTRIC PANEL NO USER SERVICEABLE SHOCK DO NOT REMOVE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. PHASE Platinum Series P12-300SB 300W S ub Bass System FREQUENCY 40Hz 120Hz FILTER Out / LFE LO LEVEL GAIN LO LEVEL...
  • Page 9 SPECIFICATION System Type: Sealed system with a long throw low resonance drive unit finely tuned with Linkwitz Riley Correction Drive Units: 300mm 12“ high-efficiency unit. Extreme long stroke composite fiber cone driven by a 2 ” 50mm voice coil. Heavy-duty non-resonant cast aluminium chassis and fully optimised stacked magnet system.

Table of Contents