Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BK Precision P12-300SB-PR
Summary of Contents for BK Precision P12-300SB-PR
- Page 1 P12-300SB-PR Subwoofer System OWNERS MANUAL...
- Page 2 CONTENTS Page No. Safety instructions. Connecting up your P12-300SB-PR. Auto / On Connecting up using the high level input. Connecting up using the low level input. Setting up your P12-300SB-PR. Controls and their functions. Specifications.
- Page 3 SAFETY INSTRUCTIONS Caution: To avoid the risk of electric shock do not remove the panel from the cabinet. If this unit fails or has a serious deterioration in performance then refer repair to the dealer where you purchased the unit. 1)Please read these instructions carefully and keep them for future reference.
- Page 4 “Mono”), or to stereo pre-amp output where available. The P12-300SB-PR comes fitted with four black M8 nylon screws that act as feet and help prevent the base of the subwoofer from getting scratched. If you wish to take advantage of...
- Page 5 In effect you are Bi-Wiring your P12-300SB-PR to your power amp. Please note that the Neutrik cable has only three leads and is arranged this way to preserve the star earthing of your amplifier (assuming it has a star earth arrangement).
- Page 6 Figure 2. Shows a diagram on how to connect the low level input. Using the supplied RCA to RCA interconnect, plug one end into the P12-300SB-PR low level input and the other end into the dedicated sub output on your amplifier or processor. If a sub out is not available then you can use a spare set of pre-amp outputs.
- Page 7 SETTING UP YOUR P12-300SB-PR Connect your P12-300SB-PR as shown in Figure 1 or Figure 2. Then attach your subwoofer to the power supply using the power cable supplied, at this point have the power switch in the off position. Now turn both the high level and low level gains to the minimum position, and the frequency control to 120Hz.
- Page 8 CONTROLS AND THEIR FUNCTIONS TO AVOID RISK OF ELECTRIC PANEL NO USER SERVICEABLE SHOCK DO NOT REMOVE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. PHASE Platinum Series P12-300SB-PR 300W Total Control FREQUENCY ub Bass System 40Hz 120Hz FILTER AUTO ON...
- Page 9 SPECIFICATION System Type: Passive Radiator Sub-bass system with on-board amplification and active filtering. Drive Units: 300mm 12“ high-efficiency unit. Extreme long stroke composite fiber cone driven by a 2 ” 50mm voice coil. Heavy-duty non-resonant cast aluminium chassis and fully optimised stacked magnet system. Matching 300mm 12“...
Need help?
Do you have a question about the P12-300SB-PR and is the answer not in the manual?
Questions and answers