Playing The Radio; Playing An Ipod - Sony XDR-S10HDiP Operating Instructions

ENTER"
MENU"
Press
POWER, or press
and hold iPod
~II
iPod~1I
To resume play,
press it again.
~
(forward) or
~ (backward)
while playing and
hold it until you
find the point.
~ (forward) or
~ (backward)
in pause and hold
it until you find
the point.
Go back to the previous
track
Pause playback
Locate a point while
listening to the sound
Select a menu item or a
track for playback
Go back to the previous
menu
Locate a point while
observing the display
Turn off the iPod
Execute the selected menu
or begin playback
To
Go to the next track
During playback, this operation goes back to
the beginning of the current track. To go back
to the previous track, press twice.
HThese operations are available only when using
the supplied remote commander.
Note
Charging for connected iPod is not available
when you are listening to the radio at volume
level 25 or more.
2
Press iPod
~II.
The iPod begins to play automatically.
You can operate the connected iPod by this
unit or the iPod buttons.
3
Adjust the volume using VOLUME
+
or
On copyrights
• iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
• iTunes is a registered trademark of Apple Inc.
• iPhone and iTunes Tagging are trademarks of
Apple Inc.
• All other trademarks and registered trademarks
are of their respective holders. In this manual,
1'''
and
il'
marks are not specified.
Notes
• When inserting an iPod into the unit, be sure to
use the universal dock adapter supplied with
your iPod or commercially available from
Apple Inc.
• When inserting an iPhone into the unit, be sure to
use the universal dock adapter supplied with the
unit or commercially available from Apple Inc.
• When placing or removing the iPod, handle the
iPod in the same angle as that of the connector
on this unit and do not twist or bend the iPod
to prevent connector damage.
• Do not carry the unit with an iPod set on the
connector. Doing so may cause a malfunction.
• When placing or removing the iPod, brace the
unit with one hand and take care not to press
the controls of the iPod by mistake.
• Before disconnecting the iPod, pause playback.
To use the unit as a battery charger
You can use the unit as a battery charger.
The charging begins when the iPod is placed on
the connector.
The charging status appears in the iPod display.
For details, see the user's guide of your iPod.
1
Attach the Apple iPod Universal Dock
Adapter (not supplied) to your iPod and
insert into the connector of the unit.
If
you are using an iPhone, attach the
supplied universal dock adapter for
iPhone before inserting into the
connector.
Reception status
Strong HD signal, digital
reception>t
Weak HD signal, analog
reception
Flashes
Stays lit
Tip
You can adjust "BRIGHTNESS" directly by
pressing
BRIGHT
on the remote commander.
Note
The display item differs depending on the content
of a broadcast or the station.
* When you tune in a station by selecting a preset
number
Note
If you do not set the menu within 10 seconds, the
setting mode is completed.
You can enjoy iPod audio by connecting to this
unit. To use an iPod, refer to the user's guide of
your iPod.
Notes
• The connector of the unit is exclusively for use
with iPod. When you use the device that does
not match the connector, connect it to the
AUDIO IN terminal of this unit with the
supplied audio connecting cable.
• Sony cannot accept responsibility in the event
that data recorded on an iPod is lost or
damaged when using an iPod connected to this
unit.
• For details of environmental conditions for
operating your iPod, check the website of Apple
Inc.
Playing an iPod
Not displayed No HD signal, analog
reception
To change the display
settings (BRIGHTNESSI
CONTRAST)
1
Press MENU to show the menu display.
2 Press SEL • or
+
to select
"BRIGHTNESS" or "CONTRAST;' then
press ENTER.
3
Press SEL • or
+
to select the setting or
to adjust the level, then press ENTER.
BRIGHTNESS:
The brightness of the display is selected
from "HIGH;' "MIDDLE" or "LOW:'
CONTRAST:
The contrast of the display can be adjusted
by II levels.
o
HD indicator
HD indicator
When an HD Radio station is received
... The HD indicator flashes momentarily at
first, and then stays lit.
e
Field strength level indicator
e
Preset number*
e
Current station's call letters
G
Band
G
Station name and information
o
Title/Artist name
C) Sub channel (FM only)
Appears when the HD Radio station
broadcasts multiple programs.
Press TUNE
+
or - to select a sub channel.
o
Frequency
e
Currenttime
o
Text information
12:00
o
Field strength level indicator
e
Preset number'"
e
Band
4:) Station name
Name of station currently tuned in.
G
Frequency
G
Text information
Text information transmitted from station.
(it Current time
* When you tune in a station by selecting a preset
number.
When an analog radio station is
received
Note
The display item differs depending on the content
of a broadcast or the station.
When text information is received
When an analog FM broadcast that
supports RBDS (Radio Broadcast Data
System) is received
o
Field strength level indicator
Q
Preset number'"
e
Band
o
Frequency
G
Current time
* When you tune in a station by selecting a preset
number.
Changing the display
mode and settings
To change the display mode
Press DISPLAY on the remote commander.
The display changes as follows:
Tuning in to a station
1 Press RADIO/BAND to turn on the radio
and select the AM or FM band.
2
Press PRESET
+
or - to select the desired
preset number.
3 Adjust the volume using VOLUME
+
or
Tip
You can scan for stations directly
by
pressing
SCAN or HD SCAN on the remote commander.
T,ol
1m
EtHER PRE~;ET
t·JO.
-Scan tuning
The unit will automatically scan the selected
band.
In HD scan, HD Radio stations are scanned.
Note
If you try to store another station with the same
preset number, the previously stored station will
be replaced.
'!'"
[: 1 [==' . 1
+
I~I·I
1
r
-i.~ .,CI,
rlHz
/~I~"i===~~~~~~;;:!1
The next preset number from the most recent
preset is displayed (but if the last preset
number was 20, 20 is displayed).
3
Press PRESET
+
or - to select the preset
number, then press ENTER.
The frequency is stored with the selected
preset number and you will hear a beep.
To preset another station, repeat these steps.
Press RADIO/BAND to turn on the radio
and select the AM or FM band.
2
Press MENU to show the menu display.
3
Press SEL • or
+
to select "SCAN" or
"HD SCAN;' then press ENTER.
Scanning of the selected band starts.
When a station is received, scanning pauses
for 3 seconds and then continues.
4
When the unit tunes in to the desired
station, do any of the following
operations to stop scanning.
- Press ENTER on the unit or remote
commander.
- Press SCAN or HD SCAN on the remote
commander.
S
If necessary, press TUNE
+
or - to tune in
to the station more precisely.
6 Adjust the volume using VOLUME + or
Playing the radio
-Manual tuning
1 Press RADIO/BAND to turn on the radio
and select the AM or FM band.
2
Press TUNE + or - to tune in to a desired
frequency.
3
Adjust the volume using VOLUME
+
or
Presetting a station
1
Follow steps I and 2 in "Manual tuning"
to tune the frequency you wish to preset.
2
Press and hold ENTER for a few seconds.
The display changes as follow:
-Preset tuning
You can preset 20 stations each for AM and FM.