Versaclean VersaCarpet VC700 Owner's Manual page 5

SETUP FOR CARPET CLEANING
Attach
FAUCET MOUNTING KIT
drain
Use supplied faucet adaptor kit as necessary to fit coupler
to faucet.

Connect fresh water coupling to faucet.
supplied faucet adaptor kit as necessary to fit coupler to faucet.

Connect fresh water coupling to supply hose.
For best cleaning results, use hot water.

Attach waste water hose to waste coupling.

Direct drain tube into drain.

Connect waste water drain hose to waste wa-
ter outlet.

Connect water supply to fresh water inlet.

Connect power cords
bottom of the control panel. Rotate plug lock to secure plugs. Plug
each cord into a 15 amp circuit.

Separate Circuit Indicator light
when unit is properly connected to two separate 15 amp circuits.

Turn on water supply
Install cleaning solution bottles and
insert feed tubes
Place Step 1 Prespray bottle into left pocket and insert Prespray
tube. Secure tube with cap.
Step 2/3 Rinse Extract bottle into right pocket and insert Rinse Ex-
tract feed tube into bottle. Secure tube with cap.
NOTICE: This equipment is for use with VersaCarpet and
VersaGreen products only. Use with other products will reduce
cleaning performance and may damage the equipment and will
void the warranty.
Open tank lid, place one defoamer pellet in filter
cage. Replace lid and secure with clamps.
49-090B VC700-115V 2014-05
to water supply and
Sockets are located under the
will glow green
and check for leaks.
THE VC700 IS NOW READY FOR CARPET CLEANING USE.
VISIT WWW.VERSACLEANSYSTEMS.COM

Use







5
Fresh water
to VC700
Insert
feed
tubes as
shown.
Step 1
Step 2/3 Rinse
Prespray
Extract
Legend Brands, Inc.
Waste water
to drain.