Table of Contents
Advertisement
Quick Links
81691
QUICK SETUP
Place your Atomic Weather Station close to a window and away from metal surfaces, electrical
appliances and strong magnetic field. Keep it at least 3 feet away from the AC outlet or AC/DC
adaptor.
Step 1
Plug in the AC/DC adaptor to any AC household outlet. Then plug in the DC jack to the back of
your unit. Inset the stand to the bottom of your weather station.
Step 2
Slide open the battery cover at the back of your weather station, then insert 3 x AA alkaline
batteries (included) to the back of your weather station. Replace the battery cover.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SkyScan 81691
Summary of Contents for SkyScan 81691
- Page 1 81691 QUICK SETUP Place your Atomic Weather Station close to a window and away from metal surfaces, electrical appliances and strong magnetic field. Keep it at least 3 feet away from the AC outlet or AC/DC adaptor. Step 1 Plug in the AC/DC adaptor to any AC household outlet. Then plug in the DC jack to the back of your unit.
- Page 2 Step 3 Press and hold +/ TIME ZONE to set your time zone, the time zone icons appear on top of the time digits (“P” for Pacific Standard Time, “M” for Mountain Standard Time, “C” for Central Standard Time, “E” for Eastern Standard Time) , then press and hold +/TIME ZONE for 2 seconds each time to select your time zone.
- Page 3 TO USE THE LIGHT SENSOR This weather station is equipped with a light sensor which automatically adjusts the LCD backlight when the surrounding environment becomes dark. Please keep no obstruction within 1-foot distance from the sensor. TO SET CALENDAR, TIME, DAYLIGHT SAVING TIME, 12/24 HR TIME FORMAT 1.
- Page 4 TO USE SNOOZE ALARM When time reaches your set alarm time, your weather station will give beep sound to wake you up. The “ ” icon will flash. 1) Press SNOOZE / LIGHT once to stop the alarm temporarily, the “ ”...
- Page 5 AIR PRESSURE HISTORY BAR CHART The bar chart indicates the air pressure history trend over the last 12 hours in 6 steps: 0h, -1h, -2h, -3h, -6h and -12h. The “0h” represents the current full hour air pressure recording. The columns represent the “inHg” at specific time. If the bars are rising it means that the weather is getting better due to the increase of air pressure.
- Page 6 WWVB time and date will not Wait until overnight for signal to be received. set or update Move your weather station away from sources of electricity. Place your weather station in window facing Colorado. Time is one or few hours off Make sure you select the right U.S.
- Page 7 encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Need help?
Do you have a question about the 81691 and is the answer not in the manual?
Questions and answers