Using Play Mode; Creating Your Own Program - Sony DAV-FXG99K Operating Instructions Manual

– you disconnect the AC power cord (mains lead).
• For a DVD-VR, VIDEO CD, Super Audio CD, CD,
DATA CD, or DATA DVD, the system remembers
the resume playback point for the current disc.
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work properly with some
discs.
Tip
• To play from the beginning of the disc, press x twice,
then press H.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
This system recalls the point where you stopped
the disc the last time it was played and resumes
playback from that point the next time you insert
the same disc. When the resume playback
memory is full, the resume playback point for
the earliest disc is deleted.
To activate this function, set [MULTI-DISC
RESUME] in [SYSTEM SETUP] to [ON]. For
details, see "[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)" (page 58).
Note
• This system can store at least 10 resume playback
points.
• If [MULTI-DISC RESUME] in [SYSTEM SETUP]
is set to [OFF] (page 58), the resume point is cleared
when you change the function by pressing
FUNCTION +/–.
Tip
• To play from the beginning of the disc, press x twice,
then press H.
40
GB

Using Play Mode

Creating your own program

(Program Play)
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
1
Press DISPLAY.
The Control Menu display appears on the
TV screen.
2
Press X/x to select
then press .
The options for [PROGRAM] appear.
3
Press X/x to select [SET
press .
Total time of the programmed tracks
PROGRAM
ALL CLEAR
– –
1. TRACK
– –
2. TRACK
– –
3. TRACK
– –
4. TRACK
– –
5. TRACK
– –
6. TRACK
– –
7. TRACK
Tracks recorded on a disc
4
Press c.
The cursor moves to the track row [T] (in
this case, [01]).
PROGRAM
ALL CLEAR
– –
1. TRACK
– –
2. TRACK
– –
3. TRACK
– –
4. TRACK
– –
5. TRACK
– –
6. TRACK
– –
7. TRACK
5
Select the track you want to program.
For example, select track [02].
Press X/x to select [02] under [T], then
press .
[PROGRAM],
t
], then
0: 00:00
T
– –
01
02
03
04
05
06
0: 00:00
T
– –
01
02
03
04
05
06