Sony DAV-FXG99K Operating Instructions Manual page 10

1
Remove the rear panel of the surround speaker.
2
Turn the surround speaker upside down, and thread the 2 speaker cords through.
The white and blue speaker cords are for the surround speaker (L) labeled "SUR L." The red and
grey speaker cords are for the surround speaker (R) labeled "SUR R."
3
Thread the speaker cords through, and set the screws (silver) in the screw holes of the
stand base.
10
GB
This side down.
,
Rear panel
About 800 mm
Surround speaker
Stand base
Screws (silver)