Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russound A-SZ4
Summary of Contents for Russound A-SZ4
- Page 1 A-SZ4 4-zone A-BUS Subzone Installation Manual...
-
Page 2: Safety Instructions
If water or any other liquid enters force and uneven surfaces may cause the appliance and cart du Canada. the appliance cabinet, take it to qualifi ed service personnel combination to overturn. for inspection. Russound A-SZ4 Installation Manual... -
Page 3: Table Of Contents
Up to two A-SZ4 units may be used with a single C-Series controller for a total of eight subzones. Each subzone can be individually assigned to a specifi c host zone on the C-Series controller so multiple subzones (up to 8) can be paired with a single host zone. -
Page 4: Front And Back Panel Illustrations
FRONT AND REAR PANEL A-SZ4 Front Panel Power Switch / LED Controller ID Switch Zone ID Switches Zone Audio Inputs Fuse Receptacle Keypad Outputs RNET Link Device ID Switches A-SZ4 Rear Panel Russound A-SZ4 Installation Manual... -
Page 5: Front And Back Panel Features
Keypad Output port must be in the up position. Device Controller ID Switch ID Switch #5 determines the ID# of the A-SZ4. As up to two may be used on the The Controller ID Switch is used to confi gure the A-SZ4 to communicate with same host C-Series controller, each must have unique identifi cation for proper a particular C-Series ‘host’... -
Page 6: Installation Options
INSTALLATION OPTIONS The A-SZ4 can be set on a shelf or by using the supplied brackets it can be mounted in an A/V equipment rack, or surface-mounted. Its 1U high and ½ rack width size permits two units to be mounted alongside one another in a single rack unit space. -
Page 7: Subzone System Configuration
SUBZONE SYSTEM CONFIGURATION In this example diagram, an A-SZ4 is being used to support 4 subzones on an As such, the Line Output from the MCA-C5 Zone #1 is connected to both the MCA-C5 controller. A-SZ4 Zone Audio Input #1 and #2. The other two Keypad Output ports are set... -
Page 8: Legacy Devices
ON or UP position. A legacy hub such as the A-H2 or A-H4 may be used with provide suffi cient power to a connected A-K5L keypad, and the A-SZ4 will not A-K3 (or A-KP2) keypads to expand a Keypad Output port of the A-SZ4 if more support advanced features of the A-K5L keypad (auto-population of source subzones are required. -
Page 9: Keypad Operation With A-Sz4
KEYPAD OPERATION WITH A-SZ4 The following table outlines which operations are available to A-BUS keypads directly connected to the A-SZ4. Each keypad type has its own method for installation setup and operation. Please refer to the product manual for the specifi c keypad(s) being used for details. - Page 10 In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, the unit must be shipped to Russound at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the unit in a corrugated container with at least three (3) inches of resilient material to protect the unit from damage in transit.
-
Page 11: Warranty / Technical Specifi Cations
Russound A-SZ4 Installation Manual... - Page 12 All trademarks are the property of their respective owners. Specifi cations are subject to 5 Forbes Road, Newmarket, NH 03857 change without notice. Russound is not responsible for typographical errors or omissions. tel 603.659.5170 • fax 603.659.5388 A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia.