After Use - Panasonic EH2473 Operating Instructions Manual

Recommended basic patterns
Solving your concerns to produce beautiful, healthy skin
Warm and cool cosmetic programs — Three Warm/Cool courses (The indicated
time is for reference only)
Clear skin course
For vibrant, glossy skin
Press the STOP/START (stop/start) switch when COURSE 1 lamp blinks.
Removing Face Warm
1 1 1
makeup washing  min.
Skin fitness/Elasticity course
For skin fitness and shaping up
Press the STOP/START (stop/start) switch when COURSE 2 lamp blinks.
Removing Face
1 1
makeup washing
Sebum care course
Neat skin innocent of oil
Press the STOP/START (stop/start) switch when COURSE 3 lamp blinks.
Removing Face Warm
1 1 1
makeup washing  min. 1 min.
Calming down and skin preparation
Apply lotion to prepare your facial skin and apply emulsion to supplement the skin oil.
Recommended patterns using the hot steam setting
Deep cleansing For those who want to completely remove stains on the skin
Press the STOP/START
(stop/start) switch when
Remove makeup by using the steam
HOT STEAM lamp blinks.
(for about  to 4 minutes)
Massage care
For those who want an effective massage
Press the STOP/START
(stop/start) switch when
Removing Face
1 1
makeup washing HOT STEAM lamp blinks.
(for about  minutes)
(Follow the instructions for massage with cosmetics.)
Calming down and skin preparation
Apply lotion to prepare your facial skin and apply emulsion to supplement the skin oil.
● The Hot steam course will stop automatically after 1 minutes.
● After the deep cleansing and the massage care, press the STOP/START (stop/
start) switch in the middle of the course to stop operation.
●
If an emulsified cleansing detergent is used, wipe off any water with a tissue after
using the ion steamer, and then cleanse the skin.
10
10-11
Cool Warm Cool Warm
1 1 1
1.5 min.  min. 1.5 min.  min.
Warm Cool
1
11 min.  min.
Warm Cool Cool
Cool Warm
 min. 45 1.5
1 1 1 1
 min.
15 sec. sec. min.
Face
washing
1
(for about 1 to  minutes)
1 min.
Massage with cosmetics
and the steam
(for about 5 minutes)

After use

Be sure to discard the water in the water supply tank and in the appliance
after every use.
1
1
Press the switch to turn off the power,
and then remove the plug from the power
outlet.
● The course indication lamps turn off.
2
2
Wipe off water droplets on the waterproof
sheet.
● Wipe off water droplets with a towel and dry
completely before storing the appliance.
3
3
Leave the appliance to cool for at least
10 minutes.
4
4
Remove the nozzle cap from the nozzle.
5
5
Remove the water supply tank from the
appliance by pushing it, and discard the
water in the water supply tank.
6
6
Reinstall the water supply tank and close the cover.
●
Confirm the click.
7
7
Remove the water from the appliance by
pressing the drain button.
●
Return the appliance to a flat position and repeat
the steps above  to  times to ensure that all
water is completely drained from the appliance.
●
When discarding the water, do not get water on
the plug and power cord.
8
8
Wipe off any water from the appliance.
9 9
9
Wipe off the water on the nozzle cap and house it in the
appliance.
Hang the nozzle cap on the nozzle cap housing hook.
Nozzle cap housing hook
11
2008/01/19 13:21:55