10. DISASSEMBLY INSTRUCTIONS
Be sure to unplug the machine before disassembling and repairing the parts.
CONTROL PANEL ASSEMBLY
Unscrew 2 screws on the back of the top plate.
1
Pull the top plate backward and upward as shown.
2
3
Disconnect the Display PWB assembly connector
from trans cable.
Pull out the drawer and unscrew 2 screws.
4
5
Remove one screw.
Lift the side the control panel assembly and
6
pull it out
Unscrew the 8 screws from the control panel
7
assembly.
Disassemble the Display PWB Assembly.
8
50