LG WM2701H Series Service Manual page 57

PUMP
CIRCULATION
HOSE
PUMP HOSE
HEATER
(1) (2)
THERMISTOR
BELLOWS
56
1 Disassemble the cabinet cover.
2
Separate the pump hose, the bellows and the
circulation hose assembly from the pump
assembly.
3 Disassemble the pump assembly in arrow
direction.
1 Disassemble the cabinet cover.
2 Separate 2 connectors from the heater.
3 Loosen the nut and pull out the heater.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
1 Disassemble the cabinet cover.
2 Unplug the white connector from the
thermistor.
3 Pull it out by holding the bracket of the
thermistor.