Carriage Transmission - Service - Hobart 1712 Manual

Page: 3
1712

CARRIAGE TRANSMISSION - SERVICE

Problem?
Carriage transmission sticks in
high speed position.
Check as follows:-
1. Press the diving key boss
towards the shaft (see pic
above). If the diving key boss
disengages from the shaft,
replace the diving key, if not
look elsewhere for the prob-
lem.
Diving key = 435543
Shaft = 293036
Order both these items in the
case of replacement.
Plugs
OIL = EP 460 (284 ml)
02/95
UK. SERVICE TRAINING CENTRE
Warning this information is for HOBART STILL trained personnel only.
Reproduction of this information is prohibited without the written consent of HOBART STILL.