Specification; Electrical Specification - LG M2262D Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application Range.
1) This spec sheet is applied all of the LCD TV with LD93A
chassis.
2) Not included spec and each product spec in this spec sheet
apply correspondingly to the following each country standard
and requirement of Buyer

2. Specification

Each part is tested as below without special appointment
1) Temperature : 25±5°C(77±9°F) , CST: 40±5°C
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage (100~240V@50/60Hz)
*Standard Voltage of each product is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in accordance
with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.

4. Electrical Specification

4.1 Module Specification
- M2262D- PZL : LGD / LM215WF- TLA1( P/ N : EAJ60156901)
No Item
1 Type
2 Diagonal Size
3 Active Display area
4 Outline Dimension
5 Aspect Ratio
6 Pixel Number
7 Pixel Pitch
8 Color arrangement
9 Color Depth
10 Electrical Interface
11 Surface Treatment
12 Operating Mode
13 Backlight Unit
14 Response Time
15 Color Gamut
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
TFT Color LCD Module
21.53 inches diagonal
476.64( H) 268.11(V)
495.6( H) x 292.2( V) x16.5( D)
16: 9
1920 x RGB x 1080
0.248( H) x 0.248( V)
RGB vertical Stripe
16.7M color (6bit with A- FRC)
LVDS 2Port
Hard coating( 3H) & Anti- glare( Haze 25)
Normally White
4 CCFL (4 lamps)
Rising Time : 1.3 + Falling Time : 3.7
72%
- 6 -
3.Test method
1) Performance :
LGE TV test method followed
2) Demanded other specification
- Safety : CE,IEC specification
- EMC : CE,IEC specification
Model Market
EU
Mx62D
(PAL Market)
Appliance
Safety : IEC/ EN60065
EMI :EN55013
EMS : EN55020
Unit Remark
mm
mm Typ. (Without Inverter)
pixel
mm
ms Typ.
LGE Internal Use Only