Adjustment Instruction - LG M2262D Service Manual

1. Application
This document is applied to LD93A chassis LCD Monitor TV
which is manufactured in TV (or Monitor) Factory or is
produced on the basis of this data.
2. Designation
2.1 The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
2.2. Power Adjustment: Free Voltage
2.3. Magnetic Field Condition: Nil.
2.4. Input signal Unit: Product Specification Standard
2.5. Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25°C ± 5°C
Relative humidity : 65 ±10%
Input voltage : 220V, 60Hz
2.6. Adjustment equipment: Color Analyzer (CA-210 or CA-
110), Pattern Generator (MSPG-925L or Equivalent),
DDC Adjustment Jig equipment, SVC remote controller
2.7. Don't push The "IN STOP KEY" after completing the
function inspection.
3. Tool Option
Model Module
LGD
M1962D-PZL
CMO
LGD
M2062D-PZL
LGD
M2262D-PZL AUO
M2362D-PZL LGD
M2062D-PZL CMO
4. Main PCB check process
• APC - After Manual-Insult, executing APC
4.1 Download
1. Execute ISP program "Mstar ISP Utility" and then click
"Config" tab.
2. Set as below, and then click "Auto Detect" and check "OK"
message.
If display "Error", Check connect computer, jig, and set.
3. Click "Connect" tab.
If display "Can't ", Check connect computer, jig, and set.
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes

ADJUSTMENT INSTRUCTION

Tool option
4301
20941
4557
4813
37581
5069
5325
(2) OK
4. Click "Read" tab, and then load download file(XXXX.bin)
by clicking "Read"
(4)
filexxx.bin
5. Click "Auto" tab and set as below
6. Click "Run".
7. After downloading, check "OK" message.
(5)
filexxx.bin
- 13 -
(1) (3)
Please Check the Speed :
To use speed between
from 200KHz to 400KHz
(6)
(8) ..........OK
(7)
LGE Internal Use Only