Using a Household Power Outlet" . .
_
With AC Adapter Kit ACK-DC20 (optional), you can connect the camera
to a household power outlet and not worry about the battery level.
Connect the power cord.
• Connect the power cord as shown in
the illustration.
When you are finished, disconnect
the plug from the power outlet.
Connect the DC Coupler DR-700.
f$
Connect the cord's plug to the DC
Coupler DR-700.
DC Coupler DR-20 is cannot be used
with this camera.
Insert the DC Coupler.
t1t
Open the cover and insert the DC
Coupler until it locks in place.
Push in the DC cord.
• Open the DC cord cover and install
the cord as shown.
t1t
Close the cover.
o
Do not connect or disconnect the power cord while the camera's power
switch is set to
<ON>.
154