Restarting The Ice Maker - DCS RF151 Service Manual

1. With the rocker switch in the "OFF" position, plug the unit into an electrical outlet.
2. Reconnect or turn on the water supply line.
3. Reconnect the drain tubing if removed.
4. Turn the rocker switch to the "ON" position.
5. Check the water inlet, drain lines, and fittings for any water leaks.
6. Check drain pump (if equipped) operation by pouring approximately two quarts of water into the ice storage bin. The drain
pump should activate and discharge water (refer to drain pump installation instructions). Check for water leaks at all hose
connections.

rESTArTING THE ICE MAkEr

29