Lenovo ThinkPad Z61e Troubleshooting Manual page 43

6. Turn the computer over again, and open the computer display. Pick the
palm rest off the computer as shown in the drawing below.
7. Move the palm rest carefully away from the computer until you can see
where it's connected 1 , and then detach the connector 2 . Now the
palm rest has been removed.
8. If two SO-DIMMs are already installed in the memory slot, remove one
of them to make room for the new one by pressing out on the latches on
both edges of the socket at the same time. Be sure to save it for future
use.
2
1
Chapter 5. Upgrading and replacing devices
Replacing memory
35