Choose Navigation; System Info - Lark FreeBird 47.0 User Manual

Using the device

Choose navigation

Touch to enter the
To set a default navigation application:
1. Click . A list of folders stored in internal memory
and in the microSD card will be displayed.
2. Choose the file *. exe of the navigation software.
The device allows for the autostart of the navigation
software after switching on.
To activate this function click
„Navigation autostart after switching on".
Click to return to the previous screen.
Click to close the application and return to the main menu.

System info

Touch enter
In this mode you can read the data concerning
the device and GPS positioning. It is also possible
to calibrate the touch screen, reset the GPS receiver
or restore the default (factory) settings.
Click to return to the previous screen.
Click to close the application and return
to the main menu.
GPS test
Touch 'GPS test' butto to display the stream of signals
being received from the satellites.
Factory settings
1. Touch the 'Factory settings' button, than choose YES, to restore the factory settings.
2. Choose YES to restore the default (factory) setting. The process will start.
REMARK!
All unsaved data will be erased when the system is reset.
CHOOSE NAVIG
SYSTEM mode.
. mode.
button to
15