Power Management - Lenovo THINKPAD Z60T Hardware Maintenance Manual

Lenovo laptop user manual
Hide thumbs Also See for THINKPAD Z60T:
Table of Contents

Advertisement

Related service information

Power management

To reduce power consumption, the computer has three power management modes:
screen blank, standby, and hibernation.
Screen blank mode
Screen blank mode has three variants, as follows:
1. If you press Fn+F3, or if the time set on the "LCD off timer" in the BIOS Setup
2. If you are using the Advanced Configuration and Power Interface (ACPI)
3. If the time set on the "Turn off monitor" timer in the operating system expires,
To end screen blank mode and resume normal operation, press any key.
Standby mode
When the computer enters standby mode, the following events occur in addition to
what occurs in screen blank mode:
v The LCD is powered off.
v The hard disk drive is powered off.
v The CPU stops.
To enter standby mode, press Fn+F4.
Note: If you are using the ACPI operating system, you can change the action of
In certain circumstances, the computer goes into standby mode automatically:
v If a "suspend time" has been set on the timer, and the user does not do any
v If the battery indicator blinks orange, indicating that the battery power is low.
To cause the computer to return from standby mode and resume operation, do one
of the following:
v Press the Fn key.
v Open the LCD cover.
v Turn on the power switch.
Also, in either of the following events, the computer automatically returns from
standby mode and resumes operation:
v The ring indicator (RI) is signaled by a serial device or a PC Card device.
v The time set on the resume timer elapses.
24
MT 2511, 2512, 2513, and 2514
Utility expires,
v The LCD backlight turns off.
v The hard disk drive motor stops.
v The speaker is muted.
operating system and you press Fn+F3,
v The LCD backlight turns off.
v The hard disk drive motor stops.
v The LCD backlight turns off.
Fn+F4.
operation with the keyboard, the TrackPoint
connector, or the diskette drive within that time.
(Alternatively, if Hibernate when battery becomes low has been selected in the
"Power Management Properties" window, the computer goes into hibernation
mode.)
®
, the hard disk, the parallel

Advertisement

Table of Contents
loading

Table of Contents