Lenovo THINKPAD X200S Hardware Maintenance Manual page 108

100
ThinkPad X200 and X200s Hardware Maintenance Manual
Applying labels to the base cover:
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, you need to apply the following labels:
1
Product label
2
Homologation label
Following labels need to be peeled off from the old base cover, and need to be
put on the new base cover.
3
Windows license label (COA)
4
Serial number label
5
MAC address label
6
IMEI label
7
FCC-ID label for Wireless LAN
8
FCC-ID label for Wireless WAN
9
China modem label
10
SIRIM label
For some models, you need to apply one or two FCC labels, 7 or 8 . Check
the old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
10
9
8
7
1 2 3
4
5
6