Lenovo THINKPAD X120E Hardware Maintenance Manual page 87

For ThinkPad X120e
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the
base cover, you need to apply the following labels:
2
SIM information label under door
3
Information label under door
5
Certified label under battery
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
Windows license label (COA) (only for Windows 7 models)
4
Ethernet label
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or
two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.
For the location of each label, refer the following figure:
1 2 3
10 9
4 5
6
7
8
.
Chapter 8 Removing and replacing a FRU
81