Nokia N92 RM-100 Service Manual page 39

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
13. Tighten all screws in the shown order with the correct
torque.
15. Tighten these screws in the shown order with the correct
torque, too.
17. Insert the flex foil and close the connector.
Service Manual N92 RM-100
Page 39 (53)
CONFIDENTIAL
14. Insert the two short screws.
16. The Shield can be reused 4 times only. If it is not possible to
tighten these 2 screws correctly, the Shield and Type Label must
be replaced.
18. Couple the parts as shown.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
17.Okt.2006