Symptom-To-Fru Index; Numeric Error Codes - Lenovo ThinkPad G41 Hardware Maintenance Manual

Lenovo laptop hardware maintenance manual
Hide thumbs Also See for ThinkPad G41:
Table of Contents

Advertisement

Symptom-to-FRU index

Symptom-to-FRU index

The symptom-to-FRU index in this section lists symptoms
and errors and their possible causes. The most likely
cause is listed first, in boldface type.
Note: Do the FRU replacement or other actions in the
sequence shown in the column headed "FRU or
action, in sequence." If replacing a FRU does not
solve the problem, put the original part back in the
computer. Do not replace a nondefective FRU.
This index can also help you determine, during regular
servicing, what FRUs are likely to need to be replaced
next.
A numeric error is displayed for each error detected in
POST or system operation. In the displays, n can be any
number.
If no numeric code is displayed, check the narrative
descriptions of symptoms. If the symptom is not described
there, go to "Intermittent problems" on page 60.
Note
For a device not supported by diagnostic codes in
the ThinkPad notebook computers, see the manual
for that device.

Numeric error codes

Symptom or error
0175
Bad CRC1, stop
POST task—The
EEPROM checksum
is not correct.
0177
Bad SVP data, stop
POST task.
0182
Bad CRC2. Enter
BIOS Setup and load
Setup Defaults.
0185
Bad startup
sequence settings.
Enter BIOS Setup
and load setup
defaults.
52
ThinkPad G40, G41
FRU or action, in sequence
System board.
System board.
Run BIOS Setup Utility and Load Setup
Defaults.
Run BIOS Setup Utility and Load Setup
Defaults

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents