Passwords - Lenovo ThinkPad G41 Hardware Maintenance Manual

Related service information
Note: If you do not want to create the Predesktop
Area, press the N key, and then go to step 8.
5. At the next window, press Enter to continue.
v The Predesktop Area is created. The system
automatically reboots during this process.
v The recovery process copies some files to the
Predesktop Area, and PKUNZIPs others.
v Follow the prompts. You may be prompted to
change CDs.
v When the process is complete, the system reboots.
Continue to step 6 to install preloaded system.
Install the preloaded system from the CD:
6. Boot with the recovery CD (and the boot diskette if
required.)
7. If the hard disk drive is blank, the following message
is displayed: "Your computer originally included a
Product Recovery program ... Reinstall the
Product Recovery program? (Y/N) [ ]".
v To install the Predesktop Area, go to step 4.
v To preload the hard disk drive without installing the
Predesktop Area, press the N key.
8. If you get a message asking which operating system
to install, select the proper operating system and
press Enter.
9. A message is displayed: "Full Recovery:". Press
Enter to select.
10. On each of the next three windows, press the Y key.
11. Follow the prompts to complete the recovery.

Passwords

As many as three passwords may be needed for any
ThinkPad computer: the power-on password (POP), the
hard disk password (HDP), and the supervisor password
(SVP).
If any of these passwords has been set, a prompt for it
appears on the screen whenever the computer is turned
on. The computer does not start until the password is
entered.
Exception: If only an SVP is installed, the password
30
ThinkPad G40, G41
prompt does not appear when the operating
system is booted.