Pioneer BDP-HD1 Service Manual page 2

If the latest firmware is not installed, the following
messages are displayed only on the player's Front panel
display.
Player powers Off
automatically
Player powers On
automatically
Player's Front panel display
The firmware update will automatically begin. While it is
occurring, "DATA CHECK", "DOWNLOAD", "WRT
FLASH1" and other message will be displayed and the
tray will automatically open. DO NOT close or touch the
tray.
This process can take from 10 to 60 minutes to complete.
When the firmware update is complete,
5)
"DL OK" is displayed only on the player's Front panel
display and then the player turns "Off" automatically.
While the player is powered "Off", disconnect the LAN
6)
cable to the player.
If you want to do future firmware updates and/or use the
Home Media Gallery feature, then leave the LAN cable
connected.
Wait for 1 minute and press the "STANDBY/ON" button
7)
to turn the player on. "DL OK" is displayed and after a
short time the tray closes automatically.
Confirm the Firmware version.
Use the remote control for the following steps.
STANDBY/ON STANDBY/ON
ARROWS ARROWS
HOME MENU HOME MENU
BLUE BLUE
After the player completes the Power On Self Test and
8)
"NO DISC" is displayed, press the "HOME MENU"
button to enter Home Menu. Please look at your TV
screen to view and select the settings discussed next.
Copyright(c) 2008 Pioneer Corporation
INIT SETUP
NET DWLD
POWER ON
NET - DWLD
ENTER ENTER
ENT ER ENT ER ENT ER
BDP-HD1, BDP-94HD Internet Firmware Update Procedure Rev. 1.2a
Using the "Up or Down ARROW" buttons select "Initial
9)
Setup" and press the "ENTER" button. Using the
"ARROW" buttons select "Video Out" then "TV Aspect
Ratio" and press the "ENTER" button.
With the "4:3 (Standard)" or "16:9 (Widescreen)"
10)
highlighted, press the "BLUE" button and the version will
be displayed as shown in the diagram.
TV screen
Confirm the firmware has been updated to the latest
11)
version. The latest firmware version is listed on Pioneer's
website located at "http://www.pioneerelectronics.ca".
On the Home page of Pioneer's website, move the
mouse pointer over the "SUPPORT" tab at the top of the
page and click on "HOME ENTERTAINMENT" in the
drop down list.
On the left side of the page click on "Blu-ray Disc &
DVD".
In the "Elite Blu-ray Disc Players" section click on the
"VIEW OLDER MODELS ►" box.
Click on you model (i.e., BDP-HD1) from the list.
Click on the "UPDATES" tab.
Click on the first bullet (i.e., BDP-HD1 Firmware
Change History) and a text document will open.
The latest version will be at the top of the Firmware
Change History text document.
Press the "HOME MENU" button to exit.
12)
This procedure is now complete.
If you have any difficulty carrying out these instructions, please
contact Pioneer Customer Call Center Toll Free in Canada at
1-877-283-5901