Motorola DROID TURBO User Manual page 53

Transfer files
• Photos or videos: Open the photo or video, then
Bluetooth
tap > .
• People: Tap Apps >
Share Bluetooth
tap Menu > >
Wi-Fi Networks
Turn Wi-Fi power on/off
Settings
Find it: Apps >
turn it ON .
Note: To extend battery life, turn the Wi-Fi switch
you're not using it.
Connect to networks
To find networks in your range:
Settings
1 Tap Apps >
Tip: To show your phone's MAC address and Wi-Fi settings,
Advanced
tap Menu >
2 Make sure the switch at the top is
SCAN
> .
3 Tap a found network to connect it (if necessary,
Network SSID Security
enter ,
Connect
tap ).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
52 Connect & transfer
People
, tap a person, then
.
Wi-Fi
, then tap the switch to
OFF
Wi-Fi
> .
.
ON , then tap Menu
Wireless password
, and
Note: If you see a question mark in the Wi-Fi status
indicator
and enter the network's password.
Tip: When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable,
convenient internet access to other Wi-Fi enabled devices.
Note: Keep it secure. To protect your phone and hotspot from
unauthorized access, it is strongly recommended that you set
up hotspot security (WPA2 is the most secure), including
when
password.
Find it: Apps
hotspot
and check
1 Your phone turns off
network for internet access. Tap
up security:
• Network SSID: Enter a unique name for your hotspot.
• Security: Select the type of security you want:
WPA2
will need to access your Wi-Fi hotspot.
, and
Note:
Hotspot frequency band
•
after your hotspot has been active for a while, try
different channels.
, swipe the status bar down, tap the network,
Settings More
> >
Portable Wi-Fi hotspot
Wi-Fi
power and uses the mobile
Set up Wi-Fi Hotspot
WPA2
. For , enter a unique password that others
WPA2
is recommended by IEEE.
: If you notice interference
Tethering & portable
>
to set
Open
or