פתרון בעיות במחשב
כדי לטעון את הגדרותEnter ואז עלF9 . הקישו עלBIOS היכנסו לתוכנית השירות להגדרת
. והוסיפו את ההתקן לסדר האתחולBIOS פתחו את תוכנית השירות להגדרת
0175: Bad CRC1, stop POST task
0177: Bad SVP data, stop POST task. Checksum of the supervisor password in the EEPROM is not correct.
0187: EAIA data access error
0188: Invalid RFID serialization information area
0189: Invalid RFID configuration information area
0192: System Security - Embedded Security hardware tamper detected.
0260: System timer error
0270: Real time clock error
02D0: System cache error
02F4: EISA CMOS not writable
02F5: DMA test failed
02F6: Software NMI failed
02F7: Fail-safe timer NMI failed
Fan error
Thermal sensing error
17
פרק 3. פתרון בעיות במחשב
. כדי להפעיל מחדש את המערכתEnter ואז עלF10 הקישו על
.בדקו את מצב ההתקן שממנו ברצונכם לבצע אתחול
.בדקו את ההתקן שממנו ברצונכם לבצע אתחול
.בדקו את ההתקן שממנו ברצונכם לבצע אתחול
.בדקו שאין כשל במערכת ההפעלה ושהיא מותקנת כהלכה
:אם מופיעה על המסך אחת מהודעות השגיאה הבאות, מסרו את המחשב לתיקון
פתרון
.ברירת המחדל
ההתקן לא נמצא
שגיאת התקן
אין מערכת הפעלה תקינה
לא קיים בסדר האתחול
הודעה
CardBus Configuration
Error - Device Disabled
Cannot boot from any
device.