Special Features - Sharp LC-60LE822E Service Manual

Page Line
21/21
1 EEP SAVE
2 EEP RECOVER
3 MONITOR ERROR CAUSE RESET
4 MODEL NAME
5 PANEL SIZE
6 SHORT CHECK MODE
7 SHORT CHECK CURRENT
8 CURRENT SW
9 PRODUCT EEP ADR
10 PRODUCT EEP DATA
11 PRODUCT FACTORY

8. Special features

1. NORMAL STANDBY CAUSE (Page 1/21)
Display of a cause (code) of the last standby.
The cause of the last standby is recorded in EEPROM whenever it is possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
2. EEP SAVE (Page 21/21)
Storage of EEP adjustment value
3. EEP RECOVER (Page 21/21)
Retrieval of EEP adjustment value from storage area.
4. MONITOR ERR CAUSE (Page 1/21)
Display of a cause (code) of Error from sub-Microcomputer.
The cause of Error is recorded in EEPROM whenever it is possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
1) This displays Error code and time when the error occurred.
The latest error is displayed on "1)"
The error that happens ahead of "1)" is displayed on "2)".
2) The character depends on the way how to acquire Time Information
T: Time is acquired from digital broadcasting
This doesn't contain "Time offset" which is considered a time difference and Daylight-Saving Time, etc. ...
U: Time is acquired from analog broadcasting (teletext)
B: Accumulation time of Backlight
In the case that Time information cannot be acquired, "B" is displayed.
Example) In this example, it is shown that the error occurred 3 times.
1) 16 T07/01/01 12:03
2) 16 U01/01/01 04:07
3) 16 B00000004:11
4) 00 0000000000000
Item
Error code: 16 (lamp error)
* It is latest Error.
* Time is acquired from digital broadcasting.
* Time is UTC which doesn't have Time offset.
Error code: 16 (lamp error)
* It is Error that happens ahead of "1)".
* Time is acquired from analogue broadcasting.
Error code: 16 (lamp error)
* It is Error that happens ahead of "2)".
No error ("00" shows that the error is not occurred.)
Description
OFF Writing setting values to EEPROM.
OFF Reading setting values from EEPROM.
OFF Reset of monitor error cause
LE705 MODEL NAME
40 Panel size setting. (40/46/52)
Enter Check LED Back light
60
LOW
0x 0 Don't touch when serving (for producer of factory)
0x 0 Don't touch when serving (for producer of factory)
1 Don't touch when serving (for producer of factory)
Time: 07/01/01 12:03
Time: 07/01/01 04:07
Accumulation time: It is displayed that 4:11 have passed after Backlight driving.
6 – 7
LC-60LE822E/LC-60LE822ERU
Remarks (adjustment detail, etc.)