Studer OnAir 1500 Operating Instructions Manual page 237

GPI Function
Cough
TalkBack
LS_CUT
LS_DIM
* OnAir 3000 only
GPI Function
All monitoring sources, Follow CR/ST2/ST3
* ST1 Source Selector
ST2 Source Selector
All monitoring sources, Follow CR/*ST1/*ST3
All monitoring sources, Follow CR/ST1/ST2
* ST3 Source Selector
Primary Desk/*Secondary Desk/Not Spec. /
Snapshot
LSP Mode On
Red Light
FadeIn
FadeOut
OutputRoutingIn
Next In
MicGroupKey
Date printed: 04.10.11
Momentary and Latching User Requests
UserKey and User ON/OFF Requests.
Arguments
Logical Input
Source: CR / *ST1 / ST2 / *ST3 and Ext.
Destination: All TB destinations
CR / *ST1 / ST2 / *ST3 / User / Machine
CR / *ST1 / ST2 / *ST3 / User / Machine
Event-Driven Actions
The following GPInput functions are only activated if the Input Logic sets
the InputLevel to TRUE.
Arguments
All/CR/*ST1/ST2/*ST3 / String
Logical Input / Master
Logical Input / Master
Partial Output Routing 1...24 /
– / Ignore Enable Key / Desk Group1...8
StartNextA/B_Request
MicGroup1...12
SW V4.0
Description
Cough key, for mic and line inputs; input is muted, but no
change in signaling. Controls all logical inputs using the
same physical mic input; 'time' must not be set to >0
Talkback from Source to Destination (Source = Destination
not allowed for SW up to V3.1)
Monitor speakers CUT
Monitor speakers DIM
Description
Studio 1 monitor source selector
Studio 2 monitor source selector
Studio 3 monitor source selector
Recall the global snapshot with the name specified by 'String'
for the given location
Starts the fade-in ramp of the specified LogicalInput or of the
LogicalInput of the specified StripChannel, respectively.
Starts the fade-out ramp of the specified LogicalInput or of
the LogicalInput of the specified StripChannel, respectively.
Recall of Output Routing Snapshot with the name specified
by 'String'.
Argument 2 is either undefined (for downward compatibility),
IgnoreEnableKey, or a valid desk group 1...8.
All partial output routings with the option UseEnableKey set to 'true'
need Argument 2.
If Argument 2 is IgnoreEnableKey partial output routings are loaded
unconditionally.
If Argument 2 is DeskGroup1...8, partial output routings check on
loading the enable status of the corresponding desk group.
If Argument 2 is not defined, the snapshot is not loaded!
Partial output routings with the option UseEnableKey set to 'false'
are loaded unconditionally and do not need Argument 2.
Start key
Mic Group On Request key according to specified ext. Mic
Box key is on
* OnAir 3000 only
OnAir Digital Mixing Consoles
Configuration 6-67