q Touch Shutter (Tapping the Monitor to Release the
Shutter)
A (auto) M Tap the bottom tab M q/s/r Touch shooting
Pictures can be taken by simply tapping the monitor.
• Touch shutter is set by default. Proceed to step 2.
1
Tap the bottom tab, tap q/s/r (A 44),
and then tap q (touch shutter).
2
Tap the desired subject to take a picture.
Do not use force when tapping the monitor as this may
cause slight movement of the camera, resulting in
blurred images.
When digital zoom is in effect, the camera focuses on the
subject in the center of the frame.
The shutter-release button can also be used when the
touch shutter option is selected.
If X is displayed when the monitor is tapped, the
shutter cannot be released. Tap an area within X or a
border displayed when the camera detects a face.
Adjusting the A (Auto) Mode setting
Touch shutter
Touch shooting
3 3
3 3 3
47