More Information - Nikon COOLPIX S6100 Quick Start Manual

5
Take the next picture.
Frame the next image so that one-third of the
frame overlaps the previous image and press
the shutter-release button.
Repeat this process until the necessary
number of pictures have been taken to
complete the scene.
6
Tap H when shooting is complete.
The camera returns to step 3.
B
Notes on Panorama Assist
• Apply or adjust shooting settings (A 60) before releasing the shutter for the first image. Shooting
settings cannot be changed after the first picture is taken. Images cannot be deleted, nor can
zoom operate after the first picture has been taken.
• Shooting for the panorama series is terminated if the auto off function (A 162) initiates standby
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled
to a longer setting is recommended.
D
R Indicator
In Panorama assist scene mode, exposure, white balance, and
focus for all images in a panorama are fixed at the values for the first
image in each series.
When the first picture is taken, R is displayed to indicate
that exposure, white balance, and focus are locked.
D
Panorama Creation
Transfer images to a computer (A 137) and use Panorama Maker 5 (A 141) to join them in a
single panorama. Install Panorama Maker 5 from the supplied ViewNX 2 CD.
D

More Information

See "File and Folder Names" (A 178) for more information.
Shooting Suited to Scenes (Scene Mode)
22 22 22
19 19 19
22 22 22
75