Selecting A Supported Display Mode - Lenovo ThinkVision L151 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is
currently configured to a display mode outside the range of this monitor, you may
need to re-a�ach the CRT monitor temporarily until you have re-configured the
system; preferably to 1024 x 768 at 60 Hz, which is the Native Resolution Display
mode.
Table 2-2. OSD functions (continued)
OSD Icon on Main Menu
Options
Submenu
Menu Position
Default
Custom
Factory Reset
Accessibility
Chapter 2. Adjusting and using your monitor
Description
Menu position adjusts menu
location on the screen.
Default returns the menu
position to the default se�ings.
.
Horizontal: Changes the
horizontal position of the OSD.
.
Vertical: Changes the vertical
position of the OSD.
.
Save
.
Cancel
.
Reset
Resets monitor to the original
factory se�ings.
Controls bu�on and menu
se�ings for accessibility
preferences.
Bu�on repeat rate:
Select or to change.
.
Off
.
Default
.
Slow
Menu time out: Sets the
length of time the OSD will
remain active a�er the last time a
bu�on is pressed.
2-5