Tv Program Recording; Selection Of A Channel; Tape Speed Selection; Immediate Recording - Sharp DV-NC70H Operation Manual

Hide thumbs Also See for DV-NC70H:

Operation manual (102 pages)

Service manual (113 pages)

Table Of Contents

100

101

102

Table of Contents

Immediate Recording

Selection of a Channel

Select the channel you wish to record by using the number buttons,

or select the next/previous channel by pressing CH ' / ".

To change between single digit and 2-digit channel numbers, press

- / --. For example, for channel 24, press - / -- then press 2 and 4.

Tape Speed Selection

Your Unit has three tape speeds: SP (Standard Play), LP (Long Play)

and EP (Extended Play). Press TAPE SPEED to select the desired

setting.

It is recommended that EP recordings are only played back on the

Unit on which they were originally recorded.

You can record the channel you are watching or a different channel.

CASSETTE

E-240

Immediate Recording

Insert a video tape into your Unit.

Select the channel you wish to record on the Unit as above.

Press Æ Æ Æ Æ Æ REC to start recording.

Press âPAUSE/STILL to pause during recording.

Press Æ Æ Æ Æ Æ REC to continue recording.

Press ËSTOP once to stop recording.

Simple Timed Recording

Press Æ Æ Æ Æ Æ REC.

To specify a stop time, each additional press of Æ Æ Æ Æ Æ REC will delay

the stop time by 10 minutes.

Press ËSTOP once to stop recording at any time.

DVNC70H063_070.pm6

Downloaded From Disc-Player.com Sharp Manuals