Connecting a TV Equipped with S-VIDEO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
Please note, if the Output Selector Switch is set to RGB, no signal will be output from the S-VIDEO
socket.
Connecting to Audio Equipment
Connecting the Unit to audio equipment provides normal stereo sound plus powerful stereo sound enhanced
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.
Playing 2 channel audio
I Analogue Connection
To S-VIDEO
input jack
TV (with external input jacks)
If the Unit is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
DVNC70H018_024.pm6
Downloaded From Disc-Player.com Sharp Manuals
DVD Audio Connections
S-VIDEO
INPUT
21
S-VIDEO
RGB
VIDEO
LINE 2
OUTPUT
SELECTOR
LINE 1 (TV)
S-VIDEO
To S-VIDEO
OUT jack
S-VIDEO lead
(commercially available)
VIDEO/AUDIO lead
(commercially available)
To amplifier
audio input jacks
(White)
(Red)
Amplifier of stereo system, etc.
www.sharp.co.uk/support
Required lead
VIDEO/AUDIO lead (commercially available)
White (L)
White (L)
Red (R)
Red (R)
S-VIDEO lead (commercially available)
To AUDIO
OUT jacks
DVD OUT
VCR/DVD OUT
ANTENNA
DIGITAL
AUDIO
R
IN
AUDIO
L
(Red)
OPT.
R
AUDIO
VIDEO
OUT
(White)
L
Jack and Plug Colours
Audio Left: White
Audio Right: Red
29/8/02, 2:57 pm
21