Audio Output Mode; Hi-Fi Stereo Sound; Nicam Hi-Fi Stereo Sound - Sharp DV-NC70H Operation Manual

Hide thumbs Also See for DV-NC70H:
Table of Contents

Advertisement

Hi-Fi STEREO SOUND

Stereo sound is possible from this Unit if you have a stereo TV
connected to the Unit with a scart lead, or audio equipment con-
nected with audio phono leads. The Unit is normally set so that
stereo sound is possible. The sound output from the Unit is
controlled by AUDIO OUTPUT. If you wish to change the sound
output you can use AUDIO OUTPUT as follows:
• Press AUDIO OUTPUT once. The LEFT audio channel will be sent
to BOTH speakers.
• Press AUDIO OUTPUT again. The RIGHT audio channel will be
sent to BOTH speakers.
display.
• Press AUDIO OUTPUT a third time and the MONO track will be
sent to BOTH speakers.
Panel display.
• Pressing AUDIO OUTPUT a fourth time, normal Hi-Fi stereo sound
will be heard.

NICAM Hi-Fi STEREO SOUND

Your Unit can receive and record NICAM sound. The Unit is normally
set so that NICAM sound is possible if it is present on the receiving
signal, otherwise the Unit will automatically switch to receive the
mono signal. NICAM sound can be turned off. If you wish to do this
follow the procedure below:
1
Press VCR MENU to display the menu screen.
2
Press ' / " to select "MODE" then press SET to confirm.
• The MODE menu will be displayed with NICAM selected.
3
Press \ \ \ \ \ / | | | | | to select "OFF".
4
Press SET to confirm and return to the menu screen.
5
Press VCR MENU to exit to normal screen.
• If the tape being played back does not carry sound recorded on Hi-Fi
tracks, L and R will not appear on the display.
• lf the sound contains 'crackling' or 'popping' noises the sound quality
may be improved by adjusting the tracking using CH ' / ".
• If the poor quality is for a long period the Unit will automatically select
the mono track and the sound will be in mono.
• NICAM sound may not be stereo.
DVNC70H054_062.pm6
Downloaded From Disc-Player.com Sharp Manuals

Audio Output Mode

will appear on the VCR Front Panel display.
will appear on the VCR Front Panel
and
will not appear on the VCR Front
and
will appear on the VCR Front Panel display.
NICAM
AUTO
COLOUR
AUTO
BLUE MUTE
AUTO
REPEAT
16:9
AUTO
SUPER.P
:SELECT
SET :ENTER
MENU:EXIT
59
OFF
PAL
OFF
ON
OFF
OFF
ON
OFF
:CHANGE
www.sharp.co.uk/support
TIMER
OPERATE
VIDEO Plus+
EJECT
ON/OFF
ON
VCR/DVD
VCR MENU
DISPLAY
SCREEN
SELECTOR
DVD SETUP
FUNCTION
PROG/
OPEN/
ANGLE
CONTROL
REPEAT
CLOSE
TITLE
DVD MENU
CLEAR
SET
RETURN
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM
INPUT SELECT
VCR DVD
/
REV
FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE
DPSS
SPEED
SKIP
SLOW
AUDIO
CH
OUTPUT
VCR
DVD
VCR/DVD COMBINATION
RRMCGA054WJSA
20/8/02, 12:15 pm
59

Advertisement

Table of Contents
loading

Table of Contents