Table of Contents
Advertisement
Chapter 5
5.1 Signal connector pin assignment
PIN Signal (D-sub)
1
Red
2
Green
3
Blue
4
Ground
5
Self Test
6
Red Ground
7
Green Ground
8
Blue Ground
1
6
11
15-Pin mini D-Type male connector
5.2 Visual Inspection
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-
free screen display. A few isolated constant lit or unlit pixels may be present. The
maximum permitted number of pixels faults is stipulated in the stringent
international standard ISO 13406-2 (Class II).
Example: a 17" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024
= 1310720 pixels. Each pixel consists of three subpixels (red, green and blue),
so there are about 4 million dots in total.
According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may
be defective, i. e. a total of 25 faulted dots. This corresponds to approx. 0.002 % of
the entire screen surface.
PIN Signal (D-sub)
9
No connection
+5V Input
10 Ground
11 Ground
12 SDA (FOR DDC)
13 H. Sync
14 V. Sync
15 SCL (FOR DDC)
5
10
15
8
Technical Information
Advertisement
Table of Contents
