CP21EF2(C) INSTRUCTION MANUAL CP21EF1 Colour Television Flat Screen Multi System CATV Hyper Band 256 Programmes with Automatic Tuning AV Stereo Sound System...
Warnings and Cautions Caution Warning When the television receiver is not used for an High voltages are used in the operation of this extended period of time, it is advisable to discon- television receiver. Do not remove the cabinet nect the AC power cord from the AC outlet. back from your set.
Aerial Connection Connecting Outdoor Aerial Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back. Outdoor Aerial Aerial Cable Aerial Socket ANT.75 For all aerial circuit problems please consult your local dealer. Each button listed in this section has the same function as it’s Front Controls corresponding button on the remote control.
General Operation Auto shut Off Function RECALL This TV set incorporates the AUTO SHUT OFF To display the on screen indications, press function. Even if the TV is left on after you have the RECALL/COLOUR SYSTEM button. gone to sleep, the TV set changes to the standby -/- - mode within 10 minutes after all broadcasts have Programme...
General Operation OFF TIMER The OFF TIMER will switch off the TV automatical- Press the VOLUME ( + or - ) button. The set ly after 30 minutes, 1 hour, 1 hour and 30minutes, time will be increased or decreased by 10 or 2 hours.
Colour and Sound System 1) Select “SIF” with the Progamme UP or DOWN Broadcast Transmission System List button in the Semi-auto or Manual Tuning mode.Then press the VOLUME ( + or - ) Colour Sound Country Area System System button to select a optimum sound system. (Semi-Auto or Manual Tuning mode ) Middle Union of Arab Emirates,...
Picture Adjustment Basic Picture Adjustment Operation ■ To return Main menu, press ALTERNATE button. Press the MENU button for MAIN menu ■ To return to the normal TV mode, press the display. MENU button. ( Or will automatically return to the normal TV mode after 20 seconds.) PICTURE AUDIO...
Tuning of the Channels Up to 256 broadcast stations in your reception Semi-Auto Tuning and Manual Tuning area can be stored in the electronic memory. Press the MENU button for MAIN menu There are three ways of tuning as follows; display.
Tuning of the Channels Press the DIGIT button, “ 1 “ button and then Channel Copy “ 2 ” button on the remote control to enter This function can be utilized after Automatic programme number 12. (For example, to Tuning. enter programme number “...
Tuning of the Channels Select “SKIP” by pressing the Progamme Select “MEMORY” pressing UP or DOWN button,then press the Progamme UP or DOWN button, then press the VOLUME + or - button for memory. VOLUME + or - button to set SKIP to ON. To cancel Skip Channel function, set to OFF MODE SEMI...
Setting of the OSD (On Screen Display) Language Press the MENU button for MAIN menu dis ENGLISH play. VIETNAMESE P CC PICTURE AUDIO FRANCAIS PRESET BAHASA INDONESIA LANGUAGE Select “ENGLISH”, “ ”, “VIETNAMESE”, Select “LANGUAGE “ by pressing the “ ”, “FRANÇAIS”, “BAHASA INDONE- Programme UP or DOWN button.
Connecting other Equipment ■ When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1. Whenever the TV/AV button is pressed, the mode will change as follows: AV1(DVD) (This AV1(DVD) will be TV mode displayed for model with DVD Component input.) ■...
Connecting other Equipment Connecting to a DVD Player with AV1(DVD) Video Component Input Terminal (Y, Cb or Cr) (for model with DVD Component input) Connect the component output terminal on your DVD player to the component video input terminal of this product.
Connecting other Equipment Connecting to the Monitor Output Jacks The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV1 or AV2 input terminals. Recording TV broadcasts or tape dubbing INPUT MONITOR OUT...
Helpful Hints - Problems/Solutions Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: ● Check if TV is plugged in. No picture, ● Try a different channel, if OK, probably station trouble. no sound ●...