Completing The Parts Replacement - Lenovo 41X8111 Hardware Replacement Manual

3. Locate the mouse connector.
4. Disconnect the failing mouse cable from the computer.
5. Connect the new mouse to the appropriate connector on the computer.
6. Go to "Completing the parts replacement."

Completing the parts replacement

After working with parts, you need to replace the computer cover and reconnect
any cables, including telephone lines and power cords. Also, depending on the
part that was replaced, you might need to confirm the updated information in the
Setup Utility program.
1. Ensure that all components have been reassembled correctly and that no tools
2. Reposition any cables that might impede the replacement of the cover.
12
Hardware Replacement Guide
Note: Your mouse might be connected to a standard mouse connector 1 or a
USB connector 2 in the front or rear of your computer. See "Locating
the connectors on the rear of your computer" on page 2 or "Locating the
connectors on the front of your computer" on page 1.
or loose screws are left inside your computer.